 |
 |
|
| HauteROUTER HR-IXP Product Family
HauteWIND HR-IXPWIND Product Family
|
HauteWRAP HR-WRAP Product Family
HauteSHOT IP Video Product Family |
| HauteROUTER HR-IXP Product Family |
|
|
| HR-IXPSXP (Outdoor) |
High Performance Point to Point Wireless Bridging Router ideal for IPTV or other demanding streaming applications. |
|
shown with optional antenna |
- Three radio modules options
- Intel XScale IXP420 Network processor
- A complete, turn key solution
- RTP throughput of 81Mbps with no jitter or data loss
- Twice the speed of 802.11 with no jitter
|
The modularity of the radio elements of the HR-IXPSXP allow it to be field upgradeable to future technologies such as 802.16 when they become available.
For
more detail please contact our sales@hautespot.net.
|
| HR-IXPSXPs (Outdoor) |
HauteROUTER™ Single Radio Wireless Low Latency Bridge/Router
with antenna diversity and serial over IP |
|
- High Performance Intel® XScale® IXP Network Processor for near wire speed packet forwarding
- Simple to configure Web Based management interface
- Choice of Radio Modules Supporting 900Mhz at up to 700mW, 2.3-2.5Ghz at up to 400mW, 4.9 Ghz 400mW or 5.1-6.1Ghz at up to 400mW
- 10/100 Base-TX Ethernet Port (with Auto MDI/MDIX)
- Super compact, lightweight design
- Full Feature Transparent Bridging using the HauteLine™ high performance, low latency protocol for rates of up to 68Mbps actual throughput
- Passive Power Over Ethernet Supporting 9 to 48VDC Input Voltage Range
- Reverse Voltage and Transient Protection
- 6W Typical Operating Power with Radios at full power
- 0°C to 70°C Operating Temperature
- Voltage and Temperature Monitor
- USB 2.0 Host Interface
- Watchdog Timer
- Real Time Clock
- Transmit and/or receive antenna diversity
- Serial Over IP support for Pan Tilt zoom
control and more
|
For
more detail please contact our sales@hautespot.net.
|
HR-IXPDX (Outdoor) |
HauteROUTER™ Dual Radio Wireless High
Availability, Low Latency Bridge/Router |
|
- High Performance Intel® XScale® IXP Network Processor for near wire speed packet forwarding
- Simple to configure Web Based management interface
- Choice of Radio Modules Supporting 900Mhz at up to 700mW, 2.3-2.5Ghz at up to 400mW, 4.9 Ghz 400mW or 5.1-6.1Ghz at up to 400mW
- 10/100 Base-TX Ethernet Port (with Auto MDI/MDIX)
- Super compact, lightweight design
- Full Feature Transparent Bridging using the HauteLine™ high performance, low latency protocol for rates of up to 68Mbps actual throughput
or full support for standard 802.11a/b/g
- Routing between interfaces
- Passive Power Over Ethernet Supporting 9 to 48VDC Input Voltage Range
- Reverse Voltage and Transient Protection
- 6W Typical Operating Power with Radios at full power
- 0°C to 70°C Operating Temperature
- Voltage and Temperature Monitor
- USB 2.0 Host Interface
- Watchdog Timer
- Real Time Clock
|
Other Applications:
Scada
Broadcast Industry
With two radio modules which can be configured to support either licensed 2.3-2.4GHz, unlicensed ISM 2.4-2.5GHz, FCC Part 90Y Public Safety 4.9GHz, unlicensed NII 5.1-6.1GHz or unlicensed ISM 900MHz, you can select any combination of frequencies to run in parallel with all data simultaneously transmitted over both frequencies. If either of the two frequencies fail due to interference, atmospherics, or temporary obstruction, the remaining frequency remains functional. When both radio modules are up and functioning, load balancing between the frequencies is active, allowing for maximum throughput and broadband performance.
For
more detail please contact our sales@hautespot.net.
|
HR-IXPSXPi
(Indoor) |
HauteROUTER™ Wireless High Performance Streaming Media Bridge |
|
- High Performance Intel® XScale® IXP Network Processor for near wire speed packet forwarding
- Simple to configure Web Based management interface
- Choice of Radio Modules Supporting 900Mhz at up to 700mW, 2.3-2.5Ghz at up to 400mW, 4.9 Ghz 400mW or 5.1-6.1Ghz at up to 400mW
- 10/100 Base-TX Ethernet Port (with Auto MDI/MDIX)
- Super compact, lightweight design
- Full Feature Transparent Bridging using the HauteLine™ high performance, low latency protocol for rates of up to 68Mbps actual throughput
- Passive Power Over Ethernet Supporting 9 to 48VDC Input Voltage Range
- Reverse Voltage and Transient Protection
- 6W Typical Operating Power with Radios at full power
- 0°C to 70°C Operating Temperature
- Voltage and Temperature Monitor
- USB 2.0 Host Interface
- Watchdog Timer
- Real Time Clock
- Serial Over IP support
|
Other Applications:
Scada
Public Safety
Broadcast
The HR-IXPSXPi features one OFDM broadband radio module standard (with options to select which frequency), also, one 10/100 Base-TX Ethernet channel and a RS232 serial port for management and debug, 32Mbytes SDRAM, Power over Ethernet (PoE), watchdog timer and a voltage/temperature monitor. Program storage consists of 16Mbytes of on-board Flash which hosts the HauteRoute OS™ operating system.
For
more detail please contact our sales@hautespot.net.
|
HR-IXPSXi
(Indoor) |
HauteROUTER™ Wireless High Performance Indoor
Router |
|
- High Performance Intel® XScale® IXP Network
Processor for near wire speed packet forwarding
- Simple to configure Web Based management
interface
- Choice of Radio Modules Supporting 900Mhz at
up to 700mW, 2.3-2.5Ghz at up to 400mW, 4.9 Ghz
400mW or 5.1-6.1Ghz at up to 400mW
- 10/100 Base-TX Ethernet Port (with Auto MDI/MDIX)
- Super compact, lightweight design
- Full Feature Transparent Bridging using the
HauteLine™ high performance, low latency
protocol for rates of up to 68Mbps actual
throughput or full support for standard
802.11a/b/g
- Routing between interfaces
- Passive Power Over Ethernet Supporting 9 to
48VDC Input Voltage Range
- Reverse Voltage and Transient Protection
- 6W Typical Operating Power with Radios at
full power
- 0°C to 70°C Operating Temperature
- Voltage and Temperature Monitor
- RS-232 Serial Interface
- Watchdog Timer
- Real Time Clock
- Serial Over IP support
|
Other Applications:
Scada
Public Safety
Broadcast
The HR-IXPSXi features one OFDM broadband radio module standard (with options to select which frequency), also, one 10/100 Base-TX Ethernet channel and a RS232 serial port for management and debug, 32Mbytes SDRAM, Power over Ethernet (PoE), watchdog timer and a voltage/temperature monitor. Program storage consists of 16Mbytes of on-board Flash which hosts the HauteRoute OS™ operating system.
For
more detail please contact our sales@hautespot.net.
|
|
| HauteWRAP HR-WRAP Product Family |
|
|
HR-WRAPSXB
(Outdoor) |
TDMA-like or 802.11a/b/g Single Radio Outdoor
General Purpose Wireless Router/Bridge/Repeater/Station/Mesh |
shown with optional antenna
|
- Standard 2.4/5Ghz 26dB/18dB radio with option of 26dB radios for either 2.4 or 5Ghz,
or 28dB for 900MHz.
- 802.11 protocol or TDMA-like protocol for video
streaming applications
- full layer 2 to 7 routing, spanning tree, transparent bridging
- QoS, SNMP management
- Ideal for lower subscriber density access points, repeating, or high feature customer premise bridge
- port filtering, QoS, Secure Tunneling, Low Latency
- Dynamic Mesh support using layer 2 HWMP or
layer 3 OLSR
- Multicast support
- Heavy duty outdoor rated NEMA IP 6/7
enclosure
- Low power consumption, 9-20VDC, PoE
|
Ideal for typical point to multipoint surveillance applications, mobile mesh
networks and more.For
more detail or contact our sales@hautespot.net.
|
HR-WRAPDXB
(Outdoor) |
TDMA-like or 802.11a/b/g Dual Radio Outdoor
General Purpose Wireless Router/Bridge/Repeater/Station/Mesh |
|
shown with optional antenna
|
- Your choice of two 2.4/5Ghz 26dB/18dB radio with option of 26dB radios for either 2.4 or 5Ghz,
or 28dB for 900MHz.
- 802.11 protocol or TDMA-like protocol for video
streaming applications
- full layer 2 to 7 routing, spanning tree, transparent bridging
- QoS, SNMP management
- Ideal for lower subscriber density access points, repeating, or high feature customer premise bridge
- port filtering, QoS, Secure Tunneling, Low Latency
- Dynamic Mesh support using layer 2 HWMP or
layer 3 OLSR
- Multicast support
- Heavy duty outdoor rated NEMA IP 6/7
enclosure
- Low power consumption, 9-20VDC, PoE
|
Ideal for typical point to multipoint surveillance applications, mobile mesh
networks and more.For
more detail please contact our sales@hautespot.net.
|
HR-WRAPSXBi
(Indoor) |
TDMA-like or 802.11a/b/g Single Radio Indoor
General Purpose Wireless Router/Bridge/Repeater/Station/Mesh |
|
|
- Standard 2.4/5Ghz 26dB/18dB radio with option of 26dB radio for either 2.4 or 5Ghz,
or 28dB for 900MHz.
- 802.11 protocol or TDMA-like protocol for video
streaming applications
- full layer 2 to 7 routing, spanning tree, transparent bridging
- QoS, SNMP management
- Ideal for lower subscriber density access points, repeating, or high feature customer premise bridge
- port filtering, QoS, Secure Tunneling, Low Latency
- Dynamic Mesh support using layer 2 HWMP or
layer 3 OLSR
- Multicast support
- Heavy duty outdoor rated NEMA IP 6/7
enclosure
- Low power consumption, 9-20VDC, PoE
|
Ideal for typical point to multipoint surveillance applications, mobile mesh
networks and more.For
more detail please contact our sales@hautespot.net.
|
HR-WRAPDXBi
(Indoor) |
TDMA-like or 802.11a/b/g Dual Radio Indoor
General Purpose Wireless Router/Bridge/Repeater/Station/Mesh |
|
|
- Standard 2.4/5Ghz 26dB/18dB radio with option of 26dB radio for either 2.4 or 5Ghz,
or 28dB for 900MHz.
- 802.11 protocol or TDMA-like protocol for video
streaming applications
- full layer 2 to 7 routing, spanning tree, transparent bridging
- QoS, SNMP management
- Ideal for lower subscriber density access points, repeating, or high feature customer premise bridge
- port filtering, QoS, Secure Tunneling, Low Latency
- Dynamic Mesh support using layer 2 HWMP or
layer 3 OLSR
- Multicast support
- Heavy duty outdoor rated NEMA IP 6/7
enclosure
- Low power consumption, 9-20VDC, PoE
|
Ideal for typical point to multipoint surveillance applications, mobile mesh
networks and more.
|
For
more detail please contact our sales@hautespot.net.
|
HR-WRAPCX
(Outdoor) |
TDMA-like or 802.11b/g Single Radio Outdoor 2.4GHz
End Node - Low Cost |
shown with optional antenna
|
- Standard 2.4Ghz 26dB radio module
- 802.11 protocol or TDMA-like protocol for video
streaming applications
- full layer 2 to 7 routing, spanning tree, transparent bridging
- QoS, SNMP management
- Ideal for end node high feature customer premise bridge
- port filtering, QoS, Secure Tunneling, Low Latency
- Dynamic Mesh support using layer 2 HWMP or
layer 3 OLSR
- Multicast support
- Heavy duty outdoor rated NEMA IP 6/7
enclosure
- Low power consumption, 9-20VDC, PoE
|
Ideal for typical point to multipoint surveillance applications, mobile mesh
networks and more.For
more detail or contact our sales@hautespot.net.
|
HR-WRAPLX
(Outdoor) |
TDMA-like or 802.11b/g Single Radio Outdoor
Modular End Node - Low Cost |
shown with optional antenna
|
- Standard 2.4/5Ghz 26dB/18dB radio with option of 26dB radio for either 2.4 or 5Ghz,
or 28dB for 900MHz.
- 802.11 protocol or TDMA-like protocol for video
streaming applications
- full layer 2 to 7 routing, spanning tree, transparent bridging
- QoS, SNMP management
- Ideal for end node high feature customer premise bridge
- port filtering, QoS, Secure Tunneling, Low Latency
- Dynamic Mesh support using layer 2 HWMP or
layer 3 OLSR
- Multicast support
- Heavy duty outdoor rated NEMA IP 6/7
enclosure
- Low power consumption, 9-20VDC, PoE
|
Ideal for typical point to multipoint surveillance applications, mobile mesh
networks and more.For
more detail or contact our sales@hautespot.net.
|
HR-WRAPHX
(Outdoor) |
TDMA-like or 802.11b/g Single Radio Outdoor
Modular End Node With Integrated 9 port Ethernet Switch |
shown with optional antenna
|
- Standard 2.4/5Ghz 26dB/18dB radio with option of 26dB radio for either 2.4 or 5Ghz,
or 28dB for 900MHz.
- 802.11 protocol or TDMA-like protocol for video
streaming applications
- 9 10/100Mbps Ethernet ports which can be
configured independently or together as a single
bridged switch
- full layer 2 to 7 routing, spanning tree, transparent bridging
- QoS, SNMP management
- Ideal for end node high feature customer premise bridge/router
with several cameras attached to Ethernet ports
- port filtering, QoS, Secure Tunneling, Low Latency
- Dynamic Mesh support using layer 2 HWMP or
layer 3 OLSR
- Multicast support
- NAT and full routing support to all ports
- Heavy duty outdoor rated NEMA IP 6/7
enclosure
- Low power consumption, 9-20VDC, PoE
|
Ideal for typical point to multipoint surveillance applications, mobile mesh
networks and more.For
more detail or contact our sales@hautespot.net.
|
|
|
|
 |
|
