HauteSpot FAQs
Does your unit support HD input? HDSDI or analog HD input?
- Date added:
- Sunday, 22 November 2009
- Last revised:
- Friday, 22 January 2010
- Hits:
- 3096
- Rating:
- Vote for this:
-
- 
- favoured:
-
0
Answer
Our wireless bridges use Ethernet only, but, you can combine it with a HD video encoder like those from HaiVision, Electosonic, RGB Spectrum, Streambox, XVD, and others. This makes a fairly small, portable solution. We have tested our bridges with a number of these vendors and they work flawlessly.
Our HauteSHOT products currently support up to D1 (720x480) at 30fps solution which is fully integrated, and expect to have an HD solution soon.
Vidovation demos portable wireless network video recorder. The microNVR is ideal for many applications combining on-site edge recording with live wireless relay such as in-vehicle video monitoring, light pole mounted video monitoring, solar powered remote video monitoring stations, camera back video recording and relay, and a pocket-carried video recorder.
We put the HauteSpot microNVR and Global Emergency Resources eWRAP to the test. Driving 700 miles from Meridian, Mississippi to Augusta, Georgia, we put a Mobotix megapixel camera attached to a microNVR and eWRAP in a moving van. The microNVR recorded at full frame rate and resolution all of the video from the camera. It also transcoded and pushed video out over the eWRAP using 3G EvDO wireless. The push architecture remained connected throughout the entire trip including through some relatively remote areas. See as short captured video of this test. 70 miles an hour, 700 miles, 10fps, VGA…