SXCi
High Performance Station Router
The HR-WRAPSXCi is designed for HR-WRAPSXCi use as an indoor master (aka “AP” or ”base station”) router in a point to
multipoint system, as a high performance station router when the highest throughput is essential, or as a wireless mesh node. Its three Ethernet ports eliminate the need for an external switch in most cases.
HR-WRAPSXCi Specification (Link)
Frequency Options
- WRAPSXCi-M
- WRAPSXCi-N
- WRAPSXCi-2
- WRAPSXCi-37
- WRAPSXCi-4
- WRAPSXCi-5
- WRAPSXCi-9
Note:
M=multiband, 25dBm/-92dBm
(2.4, 4.9*, 5GHz)
N=2.4 GHz/5 GHz 25dBm/ -97dBm 2x2 MIMO dual band radio
37=3.65** GHz, 25dBm/-92dBm
9=900MHz, 28dBm/-93dBm
2=2.4GHz, 28dBm/-97dBm
4=4.9GHz”, 26dBm/-94dBm
5=5.8GHz, 28dBm/-94dBm
Vidovation demos portable wireless network video recorder. The microNVR is ideal for many applications combining on-site edge recording with live wireless relay such as in-vehicle video monitoring, light pole mounted video monitoring, solar powered remote video monitoring stations, camera back video recording and relay, and a pocket-carried video recorder.
We put the HauteSpot microNVR and Global Emergency Resources eWRAP to the test. Driving 700 miles from Meridian, Mississippi to Augusta, Georgia, we put a Mobotix megapixel camera attached to a microNVR and eWRAP in a moving van. The microNVR recorded at full frame rate and resolution all of the video from the camera. It also transcoded and pushed video out over the eWRAP using 3G EvDO wireless. The push architecture remained connected throughout the entire trip including through some relatively remote areas. See as short captured video of this test. 70 miles an hour, 700 miles, 10fps, VGA…